OPERATING THE MACHINE 20.1.5 REMOVING THE MULTI-PURPOSE BUCKET 1 - Lower the multi-purpose bucket onto level ground. 2 - Turn the change-over lever for the additional control circuit to position ‘2’ (fig. 75_160). 3 - Unlock the quick-change unit by setting the control lever for special equipment into position ‘1’ (fig. 75_042). 4 - Loosen the hydraulic hoses of the multi-purpose bucket from the quick attach couplers. 5 - Set the quick-change unit into the dumping position ‘A’ (fig. 75_016) using the multi-function lever, until the quick- change unit is unhooked of the pickup hooks of the work unit.
6 - Make sure that nobody is behind the machine and drive the machine away from the work unit. 2 1 75_160 3 2 0 1 75_042 75_016 93