2016 Isuzu Truck 2. Compliance with applicable fuel evaporative emission regulations will be maintained if no alterations are made to the fuel filler neck(s). Compliance with applicable fuel evaporative emission regulations will be maintained if no alterations are made to change material or increase the size or length of the following nonmetallic fuel and evaporative emission hoses.
Fuel feed hoses front and rear Fuel return hoses front and rear Fuel tank filler hoses to filler neck Fuel tank vent hoses to filler neck Fuel vapor lines at canister Fuel vapor lines from engine to chassis pipes Fuel vapor lines from fuel tank sender to chassis pipes (B) SPECIFICATION FOR FILL PIPES AND OPENINGS OF MOTOR VEHICLE FUEL TANKS (APPLICABLE ONLY TO CALIFORNIA GASOLINE POWERED VEHICLES) This incomplete vehicle, when completed, will conform to Title 13, California Administrative Code Chapter 3 Air Resources Board Subchapter 7, “Specifications for Fill Pipes and Openings of Motor Vehicle Fuel Tanks”, if no alterations are made to the fuel filler neck(s).
(C) LABELS The emission control related information labels and ultra low sulfur diesel fuel label that are permanently affixed are required by government regulation and must not be obstructed from view or defaced so as to impair its visibility or legibility. PAGE 1.7