111 Maintenance Section Engine Governor Oil Supply Screen - Clean/Inspect/Replace i01562332 Engine Governor Oil Supply Screen - Clean/Inspect/Replace SMCS Code: 1264-510-Z3; 1264-571-Z3 NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, test- ing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before open- ing any compartment or disassembling any compo- nent containing fluids. Refer to Special Publication, NENG2500, “Caterpillar Tools and Shop Products Guide” for tools and supplies suitable to collect and contain fluids on Caterpillar products.
g00811569 Illustration 174 Dispose of all fluids according to local regulations and mandates. 1. Remove the four bolts (1) that hold the breather cover (2). Remove the breather. 2. Check the condition of the cover seal. Replace the seal if the seal is damaged. 3. Wash the breather and the filter element in a clean nonflammable solvent. 4. Shake the breather or use pressure air in order to dry the breather. 5. Inspect the hose for damage. Replace the hose if it is necessary. g00811400 Illustration 175 6. Install the breather assembly. Install the hose and install the hose clamp. 1. Open the engine access door. The engine governor is on the right side of the machine. 7. Close the access door.