. OPERATION EXPLANATION OF COMPONENTS 3 - 24 SEAT BELT CAUTION L This seatbelt monitor la mp (24) shows if the operator is wearing the seatbelt. If the operator is not wearing the seatbelt, t he lamp li ghts up. When operating th and check that the seatbelt BRAKE OIL PRESSURE CAUTION LAMP(ACCUMULATOR OIL PRESSURE) This brake oil pressure caution lamp (25) shows tha t the brak e oil pressure has droppe d.
If the oil pressure in t w the specified value when he brake an accumulator goes belo when the engin e is being operated, the c aution lamp lights up, the alarm bu zzer sounds intermittently, t he central warning lamp lights up, and " E02 CHECK RIGHT NOW" is displayed on the characte r display. After the engine is sta rted, if the accumulator oil p ressure is below the specified pre ssure even after 30 seconds , the brak e oil pressure caution lamp If the brake oil pressur e caution lamp lights up, mov e the machine to a safe place, and sto p the machine. Then set the g ear shift l ever to position N and tak e the necessary action. For details, see E 3-152)".
see "ACTION CODE (PAG TILT CAUTION LAMP (If equipped) If the dump body is no t completely seated on the frame and the machine tilts to the left or right more than the permitte d tilt angl e, tilt caution lamp (26) lights up, the alarm buzzer sounds intermittently, and the central warnin g lamp lights up. If this tilt caution lamp li ghts up, move the machine to a safe pl ace, stop the machine, an horizontal place. d lower the dump body. Then move to a