. SAFETY PRECAUTIONS FOR OPERATION OPERATION that there is no one in the the operator to ride on the 2 - 21 CHECK BEFORE OPERATION When carrying out the checks, m ove the machine to a wide area where there are no obstructions, and operate the machine. , traveling device, etc. work properly. slowly. Do not allow anyone near Check that the work equipment , traveling device, etc. work properly. Check for any abnormality in th e sound of the machine, vibration , heat, smell, or gauge s; check also that there is no leakage of oil or fuel. ry out repairs immediately.
If any abnormality is found, car PRECAUTIONS WHEN CHANGING Before travelling, check again surrounding area, and that ther Before travelling, sound the hor Do not allow anyone apart fro machine. Make sure that the travel alarm Post a signal person at the work rear of the machine where the Always be sure to carry out the ab machine is equipped with mirrors. PRECAUTIONS WHEN TRAVELING On the uneven ground, operate the machine at a low speed, avoiding jerky operation, so t hat the machine w ill not roll over. Otherwise the machin e might inflict a damage on the surrounding structures. opper, crusher and belt conveyor empty. e climb over obstacles. If that is e do that at a low speed.
cle that greatly tilts the machine such a case the machine can operations, always keep a safe es, or other machines to avoid structures, check first that the pport the weight of the machine. s, check first with the relevant uctions. Operate the machine with the h opper, crusher and belt conveyor empty Try to avoid having the machin unavoidable, let the machin Nonetheless avoid a big obsta to the right or left, because in easily overturn sideways. When traveling or carrying out distance from people, structur coming into contact with them.
When passing over bridges or structure is strong enough to su When traveling on public road authorities and follow their instr When operating in tunnels, unde r bridges, under electric wires, or other places where the h eight is limited, op erate slowly and be extremely carefu l not to let the work equipment hit anything.