MACHINE OPERATIONS AND CONTROLS OPERATION 3. Turn setting switch (2) to the SET position. The depth dis- play will become 0.0 m. 4. Move the bucket to the point that is to be measured (measurement surface). 5. To return the setting so that it measures the depth from the ground surface, turn mode selector switch (1) to the depth display 0 set mode position, then turn setting switch (2) to the CLEAR position. The display will return to the depth display measured from the ground surface. REMARK When carrying out the measurement, place the bucket in the same posture at the measurement point as it was at the standard surface.
If the starting switch is turned OFF in the mode set condition, the mode set condition is canceled. Setting Height Mode 0. When the boom is raised to the desired set height, it will auto- matically stop. 1. Turn mode selector switch (1) to the height mode position. 3-78