Engine Assembly (0-02) Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-114 Rocker Lever Side Clearance - Adjustment Push the number five rocker lever support toward the front of the engine and tighten the support capscrew. Torque Value: 122 [90 ft-lb] Install a 0.55 mm [0.022 inch] feeler gauge between the number five support and the intake lever for the number four cylinder. Push the number six support toward the front of the en- gine and tighten the support capscrew. Torque Value: 122 [90 ft-lb] Install a 0.55 mm [0.022 inch] feeler gauge between the number six support and the exhaust lever for the number five cylinder.
Push the number seven support toward the front of the engine and tighten the support capscrew. Torque Value: 122 [90 ft-lb] Install a 0.55 mm [0.022 inch] feeler gauge between the number seven support and the intake lever for the number six cylinder. Push the number eight support toward the front of the engine and tighten the support capscrew. Torque Value: 122 [90 ft-lb]