Service Tools - Disassembly and Assembly Section 0 - Engine Disassembly and Assembly - Group 00 M11 Page 0-6 Tool No. Tool Description Tool Illustration Connecting Rod Guide Pins Guide connecting rods over crankshaft during removal or in- stallation of connecting rods. 3376038 Dial Indicator and Sleeve Assembly Use with dial gauge attachment, Part No. ST-1325 to measure flywheel and flywheel housing runout. Use with magnetic base, Part No. 3377399, and extension, Part No. ST-537-4, to measure gear end clearance and backlash. 3376050 Cylinder Liner Driver 3376056 Install cylinder liner in cylinder block. Engine Support Stand Support engine when not in-chassis or on the engine rebuild stand.
3376057 Pulley Installation Tool Install drive pulleys. Use pulley pusher adapter, Part No. 3377401, to install the alternator drive pulley. 3376326 Camshaft Guide Pilot Aid in removal and installation of the camshaft in cylinder block. 3376388 Engine Stand Adapter Plate Adapt M11 cylinder block to the engine rebuild stand, Part No. 3375194. Requires 12 (M10-1.5 X 80) hex head capscrews, Part No. 3376434, and lockwashers. 3376432 Regulator Retainer Plug Driver 3376489 Install the high oil pressure regulator retainer plug in the cylinder block to a specified depth.