Section 0 - Engine Disassembly and Assembly - Group 00 Service Tools - Disassembly and Assembly M11 Page 0-7 Tool No. Tool Description Tool Illustration Inch Pound Torque Wrench Required to make consistent settings of the injector. Screwdriver socket, Part No. ST-669-13, must be used with this tool. 3376592 Flywheel Housing Alignment Plate Align flywheel housing with cylinder block. 3376606 Guide Pin Kit 3376695 Aid during installation of flywheel, flywheel housing, vibration damper, and air manifold. The kit contains two each of guide pins, Part Nos. 3376488, 3376638, 3376696, 3376697, and 3376698. Filter Wrench Used to remove or tighten spin on fuel filter(s) and coolant filter.
3376807 Expansion Plug Driver Install expansion plug to specified depth. Use with expansion plug driver handle, Part No. 3376795. 3822372 Cylinder Head Lifting Bracket Remove and install cylinder head to the cylinder block. 3822479 Engine Lifting Fixture Used for lifting the engine. 3822512 Piston Ring Compressor 3823309 Compress piston rings on pistons during installation of pistons in the cylinder block.