Section 0 - Engine Disassembly and Assembly - Group 00 Engine Assembly (0-02) M11 Page 0-73 Rotate the crankshaft one complete revolution (360 de- grees). The maximum TIR must not exceed 0.127 mm [0.0050 inch]. If the TIR exceeds the specifications: Remove the flywheel. Inspect the flywheel mounting surface for burrs, dirt or damage. If burrs cannot be removed with crocus cloth, or the flywheel is damaged, it must be replaced. Inspect the crankshaft flange for burrs, dirt or dam- age. If burrs cannot be removed with crocus cloth, or the crankshaft is damaged, refer to the Alternative Re- pair Manual, Bulletin No. 3810310.
Install the flywheel and tighten the capscrews to the cor- rect torque value. Measure the bore runout again.