Crankshaft, Main Bearings and Flywheel/Flywheel housing replacement CTM3274 (01JUL99) 15-16 Saran Liter Engines 060799 PN=113 FLYWHEEL HOUSING REPLACEMENT N CAUTION: Flywheel housing weighs 20 to 40 kg (43 to 86 lb). 1. Remove flywheel and oil pan. -UN-23MAY95 2. Remove the eight 3/8 in. cap screws (A) and the four 5/8 in. cap screws, then remove flywheel housing. 3. Clean mating surfaces and install new gasket (C). CD7141 4. Install flywheel housing with the eight 3/8 in. cap screws (A). Tighten as follows: • 3000/3010-Series tractors with engines ( -244461CD): —1st stage . . . . . . . . . . . . . . . . . . . . . . . . 30 N·m (23 lb-ft) —2nd stage . . . . . . . . . . . . . . . . . . . . . .
. . 50 N·m (35 lb-ft) • 3000/3010-Series tractors with engines -UN-16JUN98 (244462CD- ): Cap screws lubricated . . . . . . . . . . . . . . . . . 70 N·m (50 lb-ft) • Other applications: CD30585 —1st stage . . . . . . . . . . . . . . . . . . . . . . . . 30 N·m (23 lb-ft) —2nd stage . . . . . . . . . . . . . . . . . . . . . . . . 50 N·m (35 lb-ft) 5. Install the four 5/8 in. cap screws (B) then tighten as follows: • 3000/3010-Series tractors with engines ( -244461CD): Cap screws dry . . . . . . . . . . . . . . . . . . . . . . 320 N·m (235 lb-ft) • 3000/3010-Series tractors with engines (244462CD- ): Cap screws lubricated . . . . . . . . . . . . . . . . .
200 N·m (150 lb-ft) plus 45˚ angle • Other applications: Cap screws dry . . . . . . . . . . . . . . . . . . . . . . 230 N·m (170 lb-ft) NOTE: On certain applications, the open holes need to be obturated. Apply sealing compound on threads of cap screws. CD,3274,G15,12 -19-04JAN99 15 16