10 Fieldwork settings 10.6 Crop receptacle / straw receptacle 67086 83338 10.6.5 Straw chopper sieves installation position The straw chopper can be shifted to the rear as far as possible. In this installation position, the sieves can be mounted. Observe the general warnings at the beginning of the "Fieldwork settings" chapter. Danger! The cutting cylinders of the straw chopper can run on even if the drive is switched off. Death or serious injuries! Never touch any machine parts that con- tinue running. Wait until all machine parts have com- pletely stopped moving. 12 13 Move the straw chopper from the front position (putting the straw chopper out of opera- tion) to the rear.
Unscrew turn locks (12) on both sides. Unscrew the turn lock (13). Unscrew guard (19) and remove belt. 12 19 35 28748 Unhinge connecting rod at position (A). Disconnect speed monitoring cable at position (B). Fold up panel (20) and support it. 20 B A 36 28800 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 189