11 Fieldwork 11.9 Crop receptacle / straw receptacle 67087 Use lever (17) for raising support (16) to rest on the keeper (18). 16 18 17 19665 58 12 12 Bolt down turn locks (12) on both sides. Tighten the turn lock (13). Check belt (5). The belt (5) must make contact with all pulleys, jockey pulleys and guide rollers. Provide contact of belt if required. Close the right side cover. 13 5 59 19664 Switching on the straw chopper function monitor DOMINATOR 130 (optional equipment) The straw chopper speed monitor must be switched on when putting the straw chopper into operation (swing- ing the standard spreader to chopping position), using the pull switch (1).
1 When the chopper is standing still while the pull switch is ON, the horn on the operator's platform produces a horn sound. The straw chopper indicator light in the vehicle information unit is also activated. 60 19554 Straw chopper function monitor DOMINATOR 150 / 140 (optional equipment) The straw chopper speed monitor is switched on auto- matically when putting the straw chopper into operation (swinging the standard spreader to chopping position). 83284 11.9.2 Putting the straw chopper out of operation (swinging the standard spreader to swathing position) Observe the general warnings at the beginning of the "Fieldwork" chapter. 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 225