CLAAS Dominator 150 / 140 / 130 — 11.9.2 Putting the straw chopper out of operation (swinging the standard spreader to swathing position)

11 Fieldwork 11.9 Crop receptacle / straw receptacle 67087 Danger! The cutting cylinders of the straw chopper can run on even if the drive is switched off. Death or serious injuries! Never touch any machine parts that con- tinue running. Wait until all machine parts have com- pletely stopped moving. Loosen turn locks (12) on both sides. Loosen turn lock (13) on the right side. Relocate the straw chopper slightly to the rear for relieving the load on support (16), using crank (14). 12 12 13 14 61 19664 Use lever (17) for lifting support (16) over the keeper (18). 16 18 17 62 14 12 13 28710 Move the straw chopper to the front, using crank (14).

At the same time the straw guide plate (15) is swung forward. Bolt down turn locks (12) on both sides. Tighten the turn lock (13). 15 12 63 28748 226 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09