172 Telligent ® gearshift Overview up (to shift up) : or push and hold it down (to shift down) ; . The transmission control determines the most suitable gear (target gear) for the desired gearshift direction, depending on the vehicle load. The transmission control shifts up or down at least one gear to a suitable gear. The gear change is complete when the on-board computer display shows the selected gear. The preselected gear flashes on the on- board computer display. The gear prese- lection remains saved for approximately 15 seconds. Driving mode Changing gear with the gear preselec- tion X All vehicles: completely depress the clutch pedal.
The Telligent ® gearshift selects the prese- lected gear. A clacking noise in the instrument cluster confirms the gear change. The on-board computer display shows the engaged gear. You can preselect a gear before you depress the clutch pedal. Only once you depress the clutch pedal does the Telligent ® gearshift select the preselected gear. You can select several gears at once. X Pull the multifunction lever up briefly (to shift up) : or push it down briefly (to shift down) ; . The gearbox control shifts a gear up or down. The gear change is complete when the on-board computer display shows the selected gear. or X Slowly release the clutch pedal and depress the accelerator pedal.
You can change the preselected gear during the preselection period by pressing/pulling the multifunction lever again. The new prese- lected gear flashes on the on-board computer display. You can delete the preselected gear by turn- ing the direction switch to position i . X Briefly pull the multifunction lever up repeatedly (to shift up) : or push it down briefly (to shift down) ; , a corresponding number of times. The transmission control shifts several gears up or down. The gear change is com- plete when the on-board computer display shows the selected gear. The preselected gear flashes on the on- board computer display. The gear prese- lection remains saved for approximately 15 seconds.
or Changing gear without gear preselec- tion You can always only shift up or down one gear. X Completely depress the clutch pedal. X Pull the multifunction lever up briefly (to shift up) : or push it down briefly (to shift down) ; . The Telligent ® gearshift selects the prese- lected gear. A clacking noise in the instrument cluster confirms the gear change. X For non-engaged operation or crawler gear : pull and hold the multifunction lever