Telligent ® gearshift 173 The on-board computer display shows the engaged gear. Reverse gear and changing direction quickly X Slowly release the clutch pedal and depress the accelerator pedal. Engaging reverse gear Stopping the vehicle Driving mode To pull away, you can only shift from neutral to the 1st to 4th reverse gear. With the vehicle stationary and the transmis- sion in neutral: Shift the transmission to neutral when stop- ping for a longer time, e.g. at traffic lights or before stopping the engine. X Depress the brake pedal or apply the park- ing brake. X Brake the vehicle and, if necessary, shift down. X Depress the clutch pedal.
X Turn the direction of travel selection switch to the k (reverse) position : . The gear change is complete when the on- board computer display shows the selected reverse gear. X Depress the clutch pedal. X Turn the direction of travel selection switch to the i (neutral) position : . The gear change is complete when N is shown on the on-board computer display. X To shift up in reverse gear if necessary: pull the multifunction lever up briefly ; . The gear change is complete when the on- board computer display shows the selected reverse gear. or X Continue to depress the brake pedal or apply the parking brake. X Release the clutch pedal. X To shift down in reverse gear if neces- sary:
push the multifunction lever down briefly = . The gear change is complete when the on- board computer display shows the selected reverse gear. X Release the brake pedal or parking brake, slowly release the clutch and depress the accelerator pedal. Z