82 Lighting system Replacing bulbs X Insert new bulb ? in such a way that the recess in the base fits into lug = of socket ; . Headlamps, front turn signal lamp X Push new bulb ? into socket ; as far as it will go. Overview X Insert socket ; into the housing and turn it clockwise, in the opposite direction to that indicated by arrow : , as far as it will go. Driver's workstation Daytime driving lights : Daytime driving lights ; Cover = Turn signal lamps ? Dipped-beam/main-beam headlamps A Foglamps Daytime driving lights, turn signal lamps, dipped-beam/main-beam headlamps: X Turn socket : anti-clockwise in the direc- tion of the arrow as far as it will go. X Before changing bulbs:
unscrew cover ; . X Pull out socket : . X After changing bulbs: screw on cover ; . X Applying light pressure, turn bulb ; anti- clockwise and remove it. Dipped-beam/main-beam headlamps X Insert new bulb ; and turn clockwise, applying light pressure. X Insert socket : into the housing and turn it clockwise, in the opposite direction to that indicated by the arrow, as far as it will go. Turn signal lamps X Turn socket ; anti-clockwise in the direc- tion of arrow : as far as it will go. X Pull out socket ; . X Pull out bulb ? from socket ; . If neces- sary, prise bulb ? out of socket ; at the base using a suitable object (arrow A ).