Lighting system 83 X Turn socket : anti-clockwise in the direc- tion of the arrow as far as it will go. Auxiliary headlamps X Pull out socket : . X Applying light pressure, turn bulb ; anti- clockwise and remove it. X Insert new bulb ; and turn clockwise, applying light pressure. X Insert socket : into the housing and turn it clockwise, in the opposite direction to that indicated by the arrow, as far as it will go. Driver's workstation X To remove: remove screws ; . Front foglamps X Remove front headlamp unit : . X Remove rubber grommet = . X Press locking spring ? down, forwards and to the right. The locking spring is released. X Turn signal lamp:
gently turn bulb = anti- clockwise and remove it. X Insert new bulb = and turn clockwise, applying light pressure. X Fold locking spring ? upwards. X Remove bulb A . X Disconnect cable connector : . X Disconnect electrical connection ; of bulb A . X Connect electrical connection ; of new bulb A . X Attach it to cable connector : . X Insert new bulb A . When doing this, the round recess of the socket (arrow) must be facing upwards. X Fold locking spring ? downwards and hook it in place. X Slide rubber grommet = upwards. Z