MAINTENANCE 3. Remove air filter assembly and remove the pre-filter sleeve. 4. Inspect the main air filter element and replace if necessary. Do not clean the main filter, the filter should be replaced. NOTE: If the filter has been soaked with fuel or oil it must be replaced. 1. Clean the air box thoroughly. 2. Install a new or clean pre-filter over the main air filter element. 3. Reinstall the filter into the air box. Be sure the filter fits tightly in the air box. Installation 5. Wash pre-filter in warm soapy water and allow it to air dry. NOTE: If unable to clean the pre-filter, replace it. 2 NOTE:
Apply a small amount of general purpose grease to the sealing edges of the filter and the air box cap seal before installing. Seal 4. Install air box cap and secure with clips. Cap Secure Clips Pre-Filter Sleeve Air Filter NOTE: Service more frequently if vehicle is operated in wet conditions or at high throttle openings for extended periods. 2.13 Air Box Foam Sea T- Se Intake Box l Intake Duct Foam Seal Air Intake Duct Breather Filter Seal Breather Hose Fitting Cap MAP Seal nsor Air Filter Boot Pre-Filter Clip (2) Sleeve Clamps Air Box Can