Engine Rebuild Guide, Break-In and Tune-Up CTM100 (06APR04) 02-010-5 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=53 IMPORTANT: Lifting straps are designed to lift the engine and small accessories such as hydraulic pumps and air compressors mounted to the engine auxiliary gear drive, or belt-driven components, such as air conditioning compressors and alternators. If larger components, such as PTO’s, transmissions, generators or air compressors, are attached to other locations on the engine, the lift straps provided with the engine are not intended for this purpose. Technician is responsible for providing adequate lifting devices under these situations.
See machine technical manual for additional information on removing engine from machine. CAUTION: The only approved method for lifting the 6105 and 6125 Engine is with the use of JDG23 Lifting Sling (D), R128000 Rear Lift Strap (E) and R503481 (OEM & AT801 Applications Only) or R128001 Front Lift Strap (F). The front plate lift eye (B) can be used as a lifting point instead of R503481 (OEM & AT801 Applications Only) or R128001 Front Lift Strap. Use extreme caution when lifting and NEVER permit any part of the body to be positioned under an engine being lifted or suspended. Lift engine with longitudinal loading on lift sling and lifting brackets only.
Angular loading greatly reduces lifting capacity of sling and brackets. IMPORTANT: Ensure that engine lifting straps are secured with Class 12.9 (or higher class) cap screws. Apply TY9370 LOCTITE 242 Thread Lock and Sealer to lift strap cap screws. NOTE: If lift eye in front plate (B) is used instead of R503481 (OEM & AT801 Applications Only) or R128001 Front Lift Strap, remove alternator (A). If front lift strap (F) is being used, remove exhaust shield (C) and install lift strap using shield mounting cap screw holes. LOCTITE is a registered trademark of Loctite Corp. RG,RG34710,47 –19–20AUG02–2/2 02 010 5