Introduction The unit versions are consecutively numbered starting with 1; i.e. each version has a special code number. In addition, the unit designation is shown at the head of each page. A separating sheet and a detailed list of contents head each unit. Power in kW (kilowatt) Previous unit HP (horsepower) 1 kW= 1.360 HP 1 HP = 0.735 kW The sections valid for all unit versions are covered in version O. The respective data (settings, tightening tor- ques, machining dimensions etc.) and special tools are Torque in Nm (Newtonmeters) Previous unit kpm (kilo pond meters) listed together at the start of each unit version.
1 Nm = 0.101972 kpm - 0.102 kpm 1 kpm = 9.80665 Nm - 9.81 Nm The numerical values in SI units resulting from the intro- duction of the international unit system are converted and rounded-off values (in accordance with DIN 1335). The specified part numbers and the figure numbers in the exploded views are designed solely for identHication pur- poses and improve differentiation between the individual versions. When ordering spare parts, always use the part numbers given in the valid microfiches. The pressure values specified in bar are positive.
Pressure In bar Previous Unil kp/cm 2 (Kilo ponds per square centimeter) The job descriptions provided in this Workshop Manual make allowance for special versions (see 00 - 1.6/1). 1 bar = 1.019716 kp/cm 2 - 1.02 kp/cm 2 1 kp/cm 2 = 0.980665 bar - 0.981 bar Special vehicles: Type Condor Messrs Thyssen Henschel 0-3500 Kassel Type TN 170 Messrs Thyssen Maschinenbau GmbH 0-5810 Wilten 6 We shall endeavour to keep this Workshop Manual up-to- date by supplying the relevant"Supplementswhen neces- sary. 2