Removal and installation of engine 01.8 352/352 A 20 Attach exhaust pipe to exhaust manifold. See 1.4/1 for tightening torque. Note: For engine model 353.959, attach exhaust pipe to turbocharger. 21 Attach V-belt for intermediate fan shaft. 22 Connect battery. 23 Lower cab, referring to 60.5-2.1/1 or 60.5-2.2/1. 24 Fill with engine oil as required. See 1.3/2 for quantity. 25 Vent fuel system, referring to 07.8-6.1/1. 26 Fill with coolant. Check cooling system for leakage, referring to 20.8-5.1/1. See 1.3/2 for quantity. Note: The reservoir ought to be 2 thirds full. 27 Carry out trial run. UKD 30 40221 42-01 2.1/11