Removal and installation of engine, parts 01.8 352/352 A 10 Attach assembling fixture to rear ~nd of crank- case. 11 Attach assembling fixture to front end of crank- case, Position engine in trestle. 12 Detach coolant reservoir. Installation 2 Attach engine to special tool No. 19 and re' move assembling fixture at front and rear. Attach and tighten coolant reservoir. 3 Attach generator. 4 Attach and tighten front engine support, referring to 1.4/1. UKO 30 402 21 42-01 2.2/3