26. HANDLING PAYLOAD METER SETTING PAPER IN PRINTER When there is only 30 cm (12 in) of paper remaining in the printer, a red line will appear on the left edge to show that it is time to replace the paper. Press the FEED switch to feed out the remaining paper. Never try to pull the paper out forcibly. Always use Komatsu genuine printer paper (7818-27-2910). 1. Open the roll of printer paper, fold the paper at a point approx. 3 cm (1.2 in) from the end of the paper, then cut the paper straight along the fold. Never cut the paper in the way shown on the right. It will cause the paper to jam. 2.
Set the print paper with the printing side facing up, and insert it straight into the paper feed hole. If the FEED switch is pressed while feeding in the paper, the paper will feed automatically. 3. When the paper comes out from the printer, pass it through the slit in the lid of the printer, then close the lid. 5-9