TM2361 (24JUN08) 9015-20-15 450DLC Excavator Operation and Tests 062608 PN=505 References Tech 2 Diagnostic Scan Tool Connection Procedure 8 11 1 9 7 2 3 10 4 –UN–16MAR06 5 6 TX1004288 TX1004288 Tech 2 Connection 1—Tech 2 Diagnostic Scan 5—DC Power Supply Cable 9—SAE 16/19 Connector 11—Personal Computer Tool 6—Battery Power Supply (Male) Memory Card Industry 2—Power Jack Connection Cable 10—Tech 2 Engine Diagnostic Association (PCMCIA) 3—Data Link Connector (DLC) 7—SAE 16/19 Adapter Connector to Engine Cable (Female) Diagnostic Connection 4—AC Power Supply Cable 8—Diagnostic Trouble Code (X6). (DTC) Memory Clear Terminal 1. Turn ignition key switch to the OFF position. 4.
Connect the Data Link Connector (DLC) (3) to the Tech 2 (1). IMPORTANT: Power must be off on the Tech 2 when inserting or removing PCMCIA 5. Connect the SAE 16/19 (female) (7) adapter to SAE card. It will damage the PCMCIA 16/19 connector (male) (9). card. 6. Connect engine diagnostic connector (10) to engine 2. With the Tech 2 Diagnostic Scan Tool (1) powered diagnostic connection (X6). down. Insert the PCMCIA (11) card with the latest version of Isuzu software into the Tech 2 (1). 3. Connect the SAE 16/19 adapter (female) (7) into DLC cable. Continued on next page JC89288,00001A1 –19–21APR06–1/13 9015 20 15