10. Press ENTER . TX1004445 –19–10MAR06 Start Up Screen Continued on next page JC89288,00001A1 –19–21APR06–3/13 TM2361 (24JUN08) 9015-20-16 450DLC Excavator Operation and Tests 062608 PN=506 References IMPORTANT: Do not plug power cable into 24-Volt power supply. This will damage the Tech 2 diagnostic scan tool. 7. Connect one of the following power supplies to Power Jack Connection (2). • AC Power Supply Cable • DC Power Supply Cable • Battery Power Supply Cable 8. Turn ignition key switch to the ON position. 9. Press the “PWR” button on the Tech 2 diagnostic scan –UN–10APR06 tool (1) and check to make sure display screen comes on. Ok the Tech 2 is powered up.
TX1006048 Battery Connection 9015 20 16 JC89288,00001A1 –19–21APR06–2/13