John Deere 450DLC — Component Checks

References 8. If alternator fails to produce specified voltage, check for worn brushes or regulator. Repair or replace parts as necessary. If Alternator still fails to produce specified voltage, replace alternator. If alternator tests OK, check indicator light circuit. LD30992,000022F –19–28APR06–2/2 Electrical Component Checks LD30992,000042F –19–18APR06–1/1 1 Component Checks –1/1 TM2361 (24JUN08) 9015-20-100 450DLC Excavator Operation and Tests 062608 PN=590 Key Switch Check 1—B Terminal 2—G1 Terminal 3—G2 Terminal 4—ACC Terminal 5—M Terminal 6—ST Terminal Remove harness from key switch. T8357AK –UN–09NOV94 Turn key switch to the ACC position.

Measure continuity between key switch terminals 1 to 4. Turn key switch to the ON position. Measure continuity between key switch terminals 1 to 5 and 1 to 4. Turn key switch to the START position. Measure continuity between key switch terminals 1 to 6, 1 to 5, and 1 to 3. LOOK: Is continuity measured between terminals? YES: Key switch is OK. Check the wiring harness. See Right Console Harness (W11) Wiring Diagram. (Group 9015-10.) NO: Key switch has failed. Replace the key switch. See Key Switch Remove and Install. (Group 9015-20.) – – –1/1 9015 20 ,100