References 2. Rotate side cover and monitor controller to expose air duct (5). 3. Remove screws (6) from air duct. 1—Monitor Controller 5—Air Duct 6—Screw (2 used) TX1005152A –UN–23MAR06 Side Cover Air Duct LD30992,0000431 –19–21MAR06–2/4 TM2361 (24JUN08) 9015-20-112 450DLC Excavator Operation and Tests 062608 PN=602 4. Remove screws (7) to disconnect monitor controller and mounting plate from side cover. 5. Disconnect harness connectors (9). –UN–23MAR06 1—Monitor Controller 7—Screw (2 used) 8—Mounting Plate 9—Harness Connectors (3 used) TX1005153A Monitor Controller Mounting Plate and Harness Connection Continued on next page LD30992,0000431 –19–21MAR06–3/4 9015 20 ,112