References 6. Remove screws (10) and remove mounting plate (8). 7. Repair or replace parts as necessary. 8. Install screws and mounting plate to monitor controller. TX1005154A –UN–23MAR06 9. Route harness through opening in side cover and connect harness connectors to monitor controller. 10. Install monitor controller to side cover. 11. Install air duct to side cover. Monitor Controller and Mounting Plate 12. Install side cover to machine. 1—Monitor Controller 8—Mounting Plate 10—Screw (2 used) LD30992,0000431 –19–21MAR06–4/4 9015 20 ,113 TM2361 (24JUN08) 9015-20-113 450DLC Excavator Operation and Tests 062608 PN=603