John Deere 450DLC — Control Valve Spool Actuating Pilot Pressure Test

TM2361 (24JUN08) 9025-25-11 450DLC Excavator Operation and Tests 062608 PN=871 Tests Control Valve Spool Actuating Pilot Pressure Test SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed Slow Idle and Fast Idle Work Mode Switch Position Dig Mode Power Mode Switch Position P (Standard) Mode Auto Idle Switch Position Off Travel Speed Switch Position Fast Speed (Rabbit) Minimum Valve Spool Actuating 3.33 MPa Pressure 3334 kPa 33.3 bar 483 psi SERVICE EQUIPMENT AND TOOLS 203836 (9/16-18 F Sw 37° x 7/16-20 M 37° x 9/16-18 M 37° ) Tee JT05471 Gauge 7000 kPa (70 bar) (1000 psi) JT02162 Transducer 35 000 kPa (350 bar) (5000 psi) JT02156A Digital Pressure/Temperature Analyzer Purpose of test is to ensure that the pilot pressure to the valve spools is enough to completely shift the spools.

Continued on next page MS12501,0000096 –19–05JUN06–1/3 9025 25 11 SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed Slow Idle and Fast Idle Work Mode Switch Position Dig Mode Power Mode Switch Position P (Standard) Mode Auto Idle Switch Position Off Travel Speed Switch Position Fast Speed (Rabbit) Minimum Valve Spool Actuating Pressure 3.33 MPa 3334 kPa 33.3 bar 483 psi