Tests 7. If pressure is not to specification and adjustment is necessary, remove pilot pressure regulating valve (2). Add shims (3) to increase pressure. Remove shims (3) to decrease pressure. Specification Pilot Pressure Regulating Valve Shim—Pressure Change 0.16 MPa approximate per 0.5 mm (0.020 in.) ........................... 160 kPa approximate per 0.5 mm (0.020 in.) 1.6 bar approximate per 0.5 mm (0.020 in.) 23 psi approximate per 0.5 mm (0.020 in.) TX1005676 –UN–03APR06 8. Tighten plug to specification. Specification Plug to Pilot Pressure Regulating Valve Housing—Torque 25 ................................................................. 220 lb-in.
Pilot Pressure Regulating Valve and Shim 2—Pilot Pressure Regulating Valve 3—Shim 9. Check the pressure settings again. TX04577,00000EB –19–05JUN06–4/4 9025 25 10 TM2361 (24JUN08) 9025-25-10 450DLC Excavator Operation and Tests 062608 PN=870