TM2361 (24JUN08) 9025-25-19 450DLC Excavator Operation and Tests 062608 PN=879 Tests Travel Speed Solenoid Valve (port SI) Test and Adjustment SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed Fast Idle Work Mode Switch Position Dig Mode Power Mode Switch Position HP (High Power) Mode Auto Idle Switch Position OFF Travel Speed Switch Position Fast (Rabbit) Travel Speed Solenoid Valve Monitor Reading ± 0.2 MPa (port SI) Pressure Monitor Reading ± 200 kPa Monitor Reading ± 2.0 bar Monitor Reading ± 29.0 psi Actual Reading From Gauge Must Be Within Pressure Range of Monitor Reading and Tolerance.
Solenoid Valve Adjusting Screw 0.069 MPa approximate per 1/4 Pressure Change turn 69 kPa approximate per 1/4 turn 0.69 bar approximate per 1/4 turn 10 psi approximate per 1/4 turn End of Adjusting Screw-to-Nut 2 mm maximum Length 0.079 in. maximum Solenoid Valve Adjusting 3.0 N•m Screw-to-Housing Nut Torque 27 lb-in.
SERVICE EQUIPMENT AND TOOLS 203836 (9/16-18 M 37° x 9/16-18 F 37° Sw x 7/16-20 M 37°) Tee JT02156A Digital Pressure/Temperature Analyzer JT02162 Transducer 35 000 kPa (350 bar) (5000 psi) Gauge 7 MPa (7000 kPa) (70 bar) (1000 psi) Purpose of test is to check that the output pressure from the travel speed solenoid valve to the travel speed selector valve in the left and right travel motors is within the specified pressure range.
Continued on next page LD30992,00002B2 –19–05JUN06–1/5 9025 25 19 SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed Fast Idle Work Mode Switch Position Dig Mode Power Mode Switch Position HP (High Power) Mode Auto Idle Switch Position OFF Travel Speed Switch Position Fast (Rabbit) Travel Speed Solenoid Valve (port SI) Pressure Monitor Reading ± 0.2 MPa Monitor Reading ± 200 kPa Monitor Reading ± 2.0 bar Monitor Reading ± 29.0 psi Actual Reading From Gauge Must Be Within Pressure Range of Monitor Reading and Tolerance.
Solenoid Valve Adjusting Screw Pressure Change 0.069 MPa approximate per 1/4 turn 69 kPa approximate per 1/4 turn 0.69 bar approximate per 1/4 turn 10 psi approximate per 1/4 turn End of Adjusting Screw-to-Nut 2 mm maximum Length 0.079 in. maximum Solenoid Valve Adjusting 3.0 N•m Screw-to-Housing Nut Torque 27 lb-in. SERVICE EQUIPMENT AND TOOLS 203836 (9/16-18 M 37° x 9/16-18 F 37° Sw x 7/16-20 M 37°) Tee JT02156A Digital Pressure/Temperature Analyzer JT02162 Transducer 35 000 kPa (350 bar) (5000 psi) Gauge 7 MPa (7000 kPa) (70 bar) (1000 psi)