John Deere 450DLC — Boom Flow Rate (port SF) Test and Adjustment

TM2361 (24JUN08) 9025-25-29 450DLC Excavator Operation and Tests 062608 PN=889 Tests NOTE: Pressure reading displayed on the monitor is calculated from an electrical signal in the main controller (MCF). The reading does not change when valve adjustment is made. The actual pressure to the boom flow rate control valve— switch valve must be measured using a gauge. Y23 The calculated pressure reading for boom flow Y22 rate solenoid valve does not displayed on the –UN–10FEB06 monitor in cab. Y25 1. Release pressure from hydraulic oil tank by pushing Y24 pressure release button at top of hydraulic oil tank. TX1003387 55 84 83 66 2.

Disconnect line for boom flow rate solenoid valve (Y22) to boom flow rate control valve—switch valve (97) from Solenoid Valve Manifold Location elbow at the bottom of solenoid valve manifold (55). Install a JT03191 Tee in the line. 3. Connect the JT02156A Digital Pressure/Temperature Analyzer and JT02162 Transducer or a 7 MPa (7000 kPa) (70 bar) (1000 psi) gauge. See JT02156A Digital Pressure/Temperature Analyzer Installation. –UN–13FEB06 4. Use one of the following test equipment to display the calculated pressure: TX1003386 1. SERVICE ADVISOR application. See SERVICE ADVISOR Connection Procedure for instruction.

(Group 9015-20.) Boom Flow Rate Solenoid Valve (port SF) Access Boom Flow Rate Solenoid Valve Test. Y22—Boom Flow Rate Solenoid Valve (port SF) Or select the following items from the menu: Y23—Boom Mode Solenoid Valve (port SC) • Hydraulic Oil Temperature Y24—Power Dig Solenoid Valve (port SG) • Actual Engine Speed Y25—Travel Speed Solenoid Valve (port SI) 55—Solenoid Valve Manifold 66—Pilot Signal Manifold 2. See Personal Digital Assistant (PDA) Connection To 83—Right Control Valve (4-spool) Excavator Using Dr. ZX Application for instruction. 84—Left Control Valve (5-spool) (Group 9015-20.) 85—To Main Relief and Power Digging Valve Select the following items from the Monitor Display:

97—To Boom Flow Rate Control Valve—Switch • Boom Flow Rate Control Pressure Valve 129—To Boom Mode Relief Control Valve • Hydraulic Oil Temperature 164—To Travel Speed Selector Valve (left and • Actual Engine Speed right travel motors) • Boom Down Pressure SERVICE ADVISOR is a trademark of Deere & Company Continued on next page LD30992,00002AF –19–25MAY06–2/4 9025 25 29