John Deere 450DLC — Test and Adjustment

Tests 5. Adjust the boom mode relief valve (128) as needed. 1 Disconnect pilot line from relief valve. Loosen nut (2). 2 Turn adjusting plug (1) in to increase pressure setting; turn adjusting plug out to decrease pressure setting. 129 Hold adjusting plug and then tighten nut. Specification Boom Mode Relief Valve Adjusting Plug—Pressure Change 2.1 MPa approximate per 1/4 turn ....... 2100 kPa approximate per 1/4 turn 21 bar approximate per 1/4 turn 300 psi approximate per 1/4 turn 128 TX1004306 –UN–09MAR06 6. Connect pilot line. 7. Check the pressure setting.

Boom Mode Relief Valve 1—Adjusting Plug 2—Nut 128—Boom Mode Relief Valve 129—Boom Mode Relief Control Valve OUT3035,0000008 –19–06JUN06–4/4 9025 25 45 TM2361 (24JUN08) 9025-25-45 450DLC Excavator Operation and Tests 062608 PN=905