John Deere 450DLC — Refrigerant Leak Test

Tests Air Conditioner Compressor Clutch Test 1 1. Disconnect connector (1) from clutch. 2. Connect battery voltage to clutch connector. 3. Clutch solenoid should engage and will “click”. T144993 –UN–28AUG01 4. If clutch solenoid does not engage repair or replace compressor. See Compressor Remove and Install (Group 1830.) and see Compressor Clutch Disassemble and Assemble. (Group 1830.) 5. If clutch solenoid engages check harness. See Air Conditioning Harness (W6) Wiring Diagram. (Group 9015-10.) 1—Connector LD30992,000049B –19–23MAR06–1/1 Refrigerant Leak Test 1. Inspect all lines, fittings, and components for oily or dusty spots.

When refrigerant leaks from the system, a small amount of oil is carried out with it. 3. If a leak detector is used, move the leak detector probe under the hoses and around the connections at a rate of 25 mm (1 in.) per second. 2. A soap and water solution can be sprayed on the components in the system to form bubbles at the source of the leak. 4. Some refrigerant manufacturers add dye to refrigerant to aid in leak detection. TX,9031,UU3168 –19–13AUG96–1/1 9031 25 5 TM2361 (24JUN08) 9031-25-5 450DLC Excavator Operation and Tests 062608 PN=967