. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM by turning cartridge cover (1) approx. 60 turning it to the Part No. Capacity 421-S95-3340 1000cc 6 - 36 1. degrees to the 2. Remove grea se cartridge (3) b detach seal c ap (4) at this time. left. Do not 3. Detach cap (5 ) and middle plug (6) from new grease c artridge and tightly scr ew it in. y to ensure that no air enters. Screw in tightl y to ensure that n 4. When fixing, if grease cartridge is pressed sl ightl y and grease comes out an cartridge is sc d deposits in a h eaped s hap e, a nd if grease rewed into suctio n port connector unde r above conditions,no air will enter. (Ma x.
No. of turn s is approx. 5 ) 5. Turn the cove r to right and tight en it until securely fixed . If not tightened well , there is a possibil ity that it will work loos e du e to machine vibra tion. Use the grease c artridge shown bel Part name Q'ty Cartridge 1