. ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM GETTING IN OR OUT OF OPERATOR'S CAB WARNING ADJUSTMENT OF JOYSTICK CONSOLE WARNING Adjusting height 1. Operate lever (1) in the cancel direction and loosen the lock. 2. Adjust the height of the console and set joystick (2) to the desired position. Amount of adjustment: 30 mm (1.2 in) 3. After setting, operate lever (1) to the LOCK position to lock the console securely in position. 6 - 42 Always spring the joystick console u p before getting in or out of the operator's cab.
If the console is sprung up, the safet y switch is turned OFF and the joystick is automatically st The joystick console is a spring- up type to make it easier for the operator to get in an d out of the operator 's cab. If the joystick is moved accident ally when the engine is running, the machine may articulate unexpecte dly. To prevent this danger, always spri ng the joystick console up when not using the joystick for operations and when cab. E position. p. OFF and the joystick cannot be k console (2) and push lock lever n. The safety switch is turned ON ted. getting in or out of the operator's 1. Set lock lever (1) to the FRE 2. Spring joystick console (2) u Turn it at least 90 degrees.
The safety switch is turned operated. 3. When operating, lower joystic (1) down to the LOCK positio and the joystick can be opera 1. Set lock lever (1) to the FRE 2. Spring joystick console (2) u Stop the machine on level ground in a safe place when carrying out the adjustment. tarting operations or when changing operator shifts. Carry out the adjustment before s Put your back against the backres t of the operator's seat and adjust the sea t so that it is po ssible to depress the br ake fully, then adjust the console. Adjusting angle, fore/aft position el direction and loosen the lock. ystick (2) to the desired position. t: 45 mm (1.8 in) 1. Operate lever (3) in the canc 2.
Adjust the console and set jo Amount of fore/aft adjustmen 3. After setting, operate lever (3 1. Operate lever (3) in the canc 2. Adjust the console and set jo 3. After setting, operate lever (3 ) to the LOCK position to lock the console securely