Gen 5 DD Platform Operators Manual Figure 8. Motor Control Module The MCM processes the data received from the CPC, for example the position of the accelerator pedal, engine brake, etc. The data is evaluated together with the data from the sensors on the engine, such as coolant and fuel temperature, and oil pressure. The data is then compared to the characteristic maps or lines stored in the MCM. From this data, quantity and timing of injection can be calculated. Aftertreatment Control Module The ACM is located on the back side of the Aftertreatment System (ATS) (see graphic below). All information subject to change without notice.
35 DDC-SVC-MAN-0217 Copyright © 2022 DETROIT DIESEL CORPORATION