Hang down gear Danger Note 1. Stop the vehicle stably. 2. Press the brake pedal and the lock button in front of the shift lever handle, and then put the shift lever into the "R" position. 3. After putting into gear, slowly release the brake pedal, and timely press the accelerator pedal, so that the vehicle can drive in reverse gear. At this time: ●The reversing signal light is on. the rear view system wil l start automatically and display het reversing image in the multimedia display screen (applicable to some models). ●The parking radar is activated, and when it is close to the obstacle, it will give an ala rmhtrough different frequencies.
uring the driving process, do not suddenly switch the shif t lever to the or position, the transmission ma y b e damaged or even an accident. hen driving, please do not put into "n" gear to slide. ●According to the change of resistance (such as traction, climbing long slope, etc.), the vehicle will start the corresponding shift program, and provide more power to the vehicle by shifting into a lower gear. This prevents frequent gear changes. ●The speed of the cold engine is very high when it is just started, so before the engine warms up, please be careful when you put into "d" or "R" gear.
hen the vehicle stops, do not speed up the ngeine, otherwise it may cause the vehicle to move accidentally. efore tsarting hte engine, please make sure tha t hte gear is in "P" or "n", do not try to start the engine in other gears. ●When shifting ht e shif thandle from "n" to other gears, please keep the engine at idle speed. 142