6.2 Method of using 2 levers Attachments, Options 1. Lift arm control lever b c d This lever (1) is used to operate the lift arm. NOTE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see "Leveling opera- tion (3-87)" a GK032141 Position (a): RAISE When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Raise Position (b): HOLD The lift arm is kept in the same position. Lower Position (c): LOWER Position (d): FLOAT The lift arm moves freely under external force. GK032142 2.
Bucket control lever This lever (2) operates the bucket. c Position (a): TILT When the bucket control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. b a Position (b): HOLD The bucket is kept in the same position. GK032143 Position (c): DUMP Tilt Dump GK032144 6-4 WA150-5H – VEAM934100