Attachments, Options 6.2 Method of using 2 levers 3. Directional selector switch This switch (3) is used to switch the direction of travel of the machine between forward and reverse. F N F Position: FORWARD R N Position: NEUTRAL R Position: REVERSE Before operating this switch, check that the condition is as fol- lows. GK032122 z Directional lever is at N z Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. 4. Directional selector actuation switch When this switch (4) is turned on, the directional selector switch is actuated. a b Position (a): ON The directional selector switch is actuated. Position (b):
OFF The directional selector switch is turned off. REMARK Turn this switch ON when the directional lever and direc- tional selector switch are at the neutral position. At any other position, this switch does not work. Even if the directional selector switch is functioning, when the directional lever is operated, the operation of the direc- tional lever is given priority. GK032123 WA150-5H – VEAM934100 6-5