6.2 Method of using 2 levers Attachments, Options 6.2.2 Operation Using switch to change between forward and reverse z When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so be particu- larly careful when changing direction to travel in reverse. 1 2 z Do not switch between FORWARD and REVERSE when traveling at high speed. z When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed suffi- ciently, then change the direction of travel. (Max.speed for changing direction:
13 km/h (8.1 MPH)) 3 GK032060 z When the directional selector switch actuation switch (3) is at the ON position, if the directional lever (1) is operated to FORWARD or REVERSE, the machine will travel in forward or reverse according to the operation of the directional lever, regardless of the position of the directional selector switch (2). z Priority is given to the operation of the directional lever, so be careful when operating. 1. Place the directional lever (1) at the N position. 2. Place the directional selector switch (2) at the N position. F N R GK032122 6-6 WA150-5H – VEAM934100 WARNING WARNING N GK032190