Safety 2.2 General precautions Attachment for protection against falling objects (FOPS) When you work on a site where there is danger of falling rocks or other objects, the machines must be equipped with a FOPS. If the FOPS is modified without permission or damaged, its stabil- ity is impaired. In this case, the FOPS must be replaced, since its correct function can no longer be guaranteed. Precautions for attachments z When installing optional parts or attachments, there may be problems with safety or legal restrictions. Therefore contact your KOMATSU distributor for advice.
z Any injuries, accidents, or product failures resulting from the use of unauthorized attachments or parts will not be the responsibility of KOMATSU. z When installing and using optional attachments, read the instruction manual for the attachment, and the general infor- mation related to attachments in this manual. Unauthorized modification Any modification made without authorization from KOMATSU can create hazards. Before making a modification, consult your KOMATSU distributor. KOMATSU will not be responsible for any injuries, accidents, product failures or other property damages resulting from modifi- cations made without authorization from KOMATSU.
Safety at worksite z Before starting operations, thoroughly check the work area for dangerous working conditions. z Inspect the surface of the soil in the working area and deter- mine the optimum and safest procedure. z When carrying out operations near combustible materials such as thatched roofs, dry leaves or dry grass, there is a hazard of fire, so be careful when operating. z Determine the required safety measures against dangers on public roads in co-operation with the owners, users, and responsible authorities.
GK032046 z On sites where there are underground water pipes, gas pipes, or conduits for high voltage cables, contact the responsible supply company to determine the lines' posi- tions. Ensure that these facilities will not be damaged. z When working with water or crossing sand banks, first check the subsoil and depth and flow rate of the water. Ensure that the permitted water depth will not be exceeded. z Take action to prevent unauthorized people from approach- ing the jobsite. WA150-5H – VEAM934100 2-13