. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BREAKER CIRCUIT ADDITIONAL OIL FILTER ELEMENT WARNING NOTICE 4 - 44 A fter the engine is stopp ed, the par ts and oil are at high temperature, so there is danger of burns. Wait for the temperature to o down before starting the operati W hen re moving the cap f rom oil fill er port (F) , turn i t slowly to release the interna l pressure, then remo For details o f the re placeme nt interval for the element, "MAINTENANCE I NTERVAL FOR HYDRAULIC BRE P repare a container to catch th e oil. 1. Place a container un der the fil ter element to catch the oil. 2. Turn fil ter cas e (1) to the left to remove it , then take out elemen (2). 3.
Remov e plug (3) fro m filter ca se (1). 4. Clean O-ring 5. When contact holder, then t ighten a further 1 /2 turns. element (2)