. MAINTENANCE MAINTENANCE PROCEDURE WARNING NOTICE in a stable condition. 4. Set the safety lock lever to the LOCK position and stop the engine. 4 - 45 WASH WASHA With the washabl e floor, it is possibl e to flus h out t he dirt on the cab floor directly with wate When setting the machine at an angle, use strong bloc ks to s tabilize t he machine and be extremely careful when carrying out the operation. If the control leve rs are touched by mistake , the work eq uipment or ma chine may suddenly move, and this may lead to a serious accident. Alway s set the safety lock l ever securely to the LOCK posi tion before standing up from t he operator's seat.
When setting the machine at an angle, use strong bloc ks to s tabilize t he machine and be extremely careful when carrying out the operation. If the control leve rs are touched by mistake , the work eq uipment or ma chine may suddenly move, and this may lead to a serious accident. Always set the safety lock le ver securely to the LOCK posit ion before standing up from t he operator's seat. While cleaning the c ab floor, take care so that the c onnect or, air condition er main body and filters may n ot be splashed with water. Method of Washin 1. Set the machi e "Method of Setting Machine at Angle (PAGE 4-46)" 2.
Swing the up per structure slowly so that water drain holes ( r are at a low position. 3. Lower the wo rk equipment to the ground and s et the machin 5. Remove the fl oor mat. (2). 6. Remove cap 7. Flush out the dirt on the floor directly wit h wate r through wat drain hole (1). 8. After completi ng the washing operation,i nstall c ap (2) and flo mat.