8. If oil level is low, remove oil filler cap (B). 9. Add oil to bring oil level no higher than "H" mark on dipstick. 10. Install dipstick. 11. Install and tighten oil filler cap. Be sure cap is pushed all the way down. 12. Lower hood. Changing Engine Oil and Filter IMPORTANT: Avoid damage! Change engine oil and filter after first 50 hours of break-in operation. Follow Service Interval Chart after that. When operating vehicle in extremely dusty or dirty conditions, change engine oil more often. 1. Park vehicle on a level surface. 2. Run engine a few minutes to warm oil. 3. STOP engine. 4. ENGAGE park brake. 5. Raise hood. c CAUTION: Avoid injury! Engine may be hot.
Be careful not to burn hands. 6. Remove right-hand side panel. 68