M71497 7. Route oil drain hose (C) to allow draining into oil pan. 8. Open drain valve (B) by turning it toward you. NOTE: Be sure oil drain pan is under filter also. 9. Drain oil in pan. While oil is draining, change oil filter (A). 10. Remove filter using a filter wrench. Turn filter counterclockwise. 11. Apply a film of clean engine oil on seal of new filter. 12. Install filter. Turn filter until seal contacts mounting surface. Then turn filter BY HAND 1/2 turn more. 13. Close drain valve. 14. Return oil drain hose to inside of frame. 15. Install right-hand side panel. 69