M71493 16. Remove filler cap (B). Add approximately 1.4 L (1.5 qt) of oil. 17. Remove dipstick (A) to check oil level. Add oil only to FULL mark "H" on dipstick. M72321 18. Install filler cap. Be sure cap is pushed all the way down. 19. Start engine and run at slow speed for two minutes. Check for leaks around filter and drain valve. 20. STOP engine. Check oil level. 21. Install dipstick. Lower hood. Cleaning Air Intake Screens IMPORTANT: Avoid damage! Side panel intake screens must be clear of dirt and debris to prevent engine from overheating and to allow good air intake for air cleaner. M71459 Clean air intake screens (A) on side panels using a brush or cloth. 70