m71503 6. Remove recovery tank: · Remove screw (B). · Pull overflow hose (C) from tank. · Remove tank. 7. Remove tank cap (D). 8. Clean recovery tank. 9. Install tank. 10. Install overflow hose to the bottom of the tank. Be sure hose is not kinked. 11. Fill cooling system. 12. Install side panels. Filling Cooling System IMPORTANT: Avoid damage! To prevent engine damage, DO NOT use antifreeze concentrate greater than 50% in the cooling system. DO NOT use antifreeze with stop-leak additive or mix or add any other additives to the cooling system. Cooling system capacity is 2.8 L (3.0 qt). When operating engine in extremely cold temperatures, see your John Deere dealer. 80