1. Check condition of coolant system hoses. 2. Install new hoses, if necessary. 3. Mix approximately 50% antifreeze with 50% distilled or deionized water. 4. Add mixture to radiator. 5. Install and tighten radiator cap. 6. Run engine until needle on temperature gauge reaches the green range. 7. STOP engine. m71496 8. Coolant level should be between lines (A) and (B) on coolant tank. After engine cools, level should be above line (C). m71494 9. Remove cap (D) to add coolant if necessary. 10. Tighten hose clamps, if necessary. 81